Sign up to continueApply now
Trystar· Spotted 4h ago

Staff Mechanical Engineer, DC Power Equipment Design

Location
Cypress, TX, US
Pay
$145,000 – $170,000 a year
Work mode
Hybrid
Level
Staff / principal
Education
Bachelor's degree
Job function
Production/Manufacturing › Mechanical Design & Manufacturing › Mechanical Engineer

Posted Nov 19, 2026Last confirmed open Nov 20, 2026

About this role

Job Title:Staff Mechanical Engineer, DC Power Equipment Design ======================================================================

Job Description

Trystar’s team members are our most important asset. We are looking for a Staff Mechanical Engineer, DC Power Equipment Design, to own the mechanical design and verification of DC power equipment, from concept through certification and into commercial-scale manufacturing.

Our products include power conversion sidecars for IT racks, DC switchboards, and DC loadbanks for data centers and other critical power applications, in 800 VDC class systems. You will also support AC power distribution and power conversion products when program priorities require it.

You will own busbar systems, enclosures, structures, and thermal integration, and you will set the mechanical design rules that every program on your product line follows. You will work closely with the electrical engineers who design power distribution and power conversion, and with the test, compliance, sourcing, and manufacturing engineers who verify, certify, and build these products.

Serving as a senior individual contributor, this position leads technically complex and high-risk mechanical work, represents mechanical engineering in design decisions on safety, reliability, manufacturability, and cost, and mentors the engineers and designers who work with you.

Location

Burnsville or Faribault, MN, or Houston, TX, onsite, is preferred; any other Trystar site, including a hybrid arrangement, will be considered for candidates with exceptional experience. Travel within North America up to 20%.

What you will do:* Own the mechanical design of assigned DC power products, such as power conversion sidecars for IT racks, DC switchboards, and DC loadbanks, from requirements and concept through certification and release to commercial-scale manufacturing.

  • Set the mechanical architecture and design rules for your product line, covering structure, busbar systems, thermal performance, electrical clearances, serviceability, and reuse, and write the mechanical design guide that engineers and reviewers follow.
  • Design busbar systems for DC power distribution and power conversion, including geometry, conductor materials, plating, bolted joints, supports, and insulation, with electrical engineers supplying the electrical requirements and reviewing the design.
  • Size busbars and their supports for continuous current, temperature rise, and short-circuit electromagnetic forces, and verify bracing for the available fault current by calculation, finite element analysis, and test.
  • Lay out clearances and creepage distances for 800 VDC class equipment, and specify insulating materials, barriers, and touch-safe guarding.
  • Design enclosures, frames, racks, and structures in sheet metal and fabricated steel, including 19 inch rack formats, lifting, anchorage, shipping splits, and seismic, wind, and environmental requirements for indoor and outdoor equipment.
  • Integrate thermal management into each product, including ventilation paths, fans and blowers, heat rejection for high-power resistive loads, and provisions for liquid cooling, and request computational fluid dynamics analyses where the design needs them.
  • Verify designs by calculation, structural and thermal analysis, and test, and write mechanical verification requirements and acceptance criteria for temperature-rise, short-circuit withstand, seismic, vibration, and ingress tests that test engineering executes.
  • Design to product safety and listing requirements, such as UL 891, UL 508A, and UL 62477-1, and prepare the construction documentation that compliance engineering and Nationally Recognized Testing Laboratories (NRTLs) review.
  • Lead mechanical design reviews and design failure mode and effects analyses (DFMEAs), and resolve the trade-offs among safety, reliability, serviceability, manufacturability, and cost.
  • Create 3D models, drawings with GD&T, and bills of materials in PDM or PLM systems, and release controlled design packages for prototype builds and commercial-scale manufacturing.
  • Work with sourcing, suppliers, and manufacturing engineering on fabrication, busbar, enclosure, and hardware selection, design for manufacture and assembly, cost reduction, obsolescence, and substitutions.
  • Support prototype builds, design validation, and the transfer of new designs to commercial-scale manufacturing, and resolve mechanical issues found in manufacturing and in the field through root-cause analysis.
  • Evaluate emerging technologies, such as laminated busbars, liquid-cooled power equipment, and 800 VDC rack power architectures, and recommend their adoption.
  • Mentor engineers and designers, review their work, and strengthen the mechanical design competency of the engineering organization.

Qualifications

------------------

REQUIRED* Bachelor’s degree in mechanical engineering or a related technical field, with typically 10 or more years of relevant industrial experience in mechanical product design for electrical power equipment, such as switchboards, switchgear, power conversion or UPS equipment, loadbanks, or rack and enclosure systems.

  • Hands-on design of busbar systems, including supports, short-circuit bracing, bolted joints, plating, and clearance and creepage, in collaboration with electrical engineers.
  • Experience designing enclosures and structures in sheet metal and fabricated steel, including lifting, anchorage, shipping, and environmental requirements.
  • Experience integrating forced-air thermal management into electrical equipment, including ventilation paths, fans, and heat-rejection layouts.
  • Experience verifying designs by calculation, structural and thermal finite element analysis, and test, and writing test requirements for temperature rise and short-circuit withstand.
  • Experience designing products to listing requirements, such as UL 891, UL 508A, UL 62477-1, or similar standards, and supporting NRTL construction reviews.
  • Proficiency with SolidWorks or equivalent 3D CAD software, PDM or PLM systems, and drawings with GD&T and bills of materials.
  • Experience with design for manufacture and assembly and with the transfer of designs to commercial-scale manufacturing.
  • Demonstrated ability to set mechanical design rules for a product line, lead design reviews and DFMEA, influence cross-functional teams, and mentor engineers.

PREFERRED* Master’s degree in mechanical engineering.

  • Design of DC power equipment at 600 VDC or more, for example in data center, battery energy storage, EV charging, solar, or rail applications.
  • Finite element analysis of electromagnetic forces on busbars, and computational fluid dynamics.
  • Seismic qualification of equipment under the International Building Code and ASCE 7, including shake-table testing to ICC-ES AC156.
  • Liquid cooling of power electronics, including cold plates, manifolds, and coolant distribution.
  • Outdoor enclosure design, including NEMA Type 3R enclosures to UL 50E and NEMA 250, corrosion protection, and wind and snow loading.
  • Experience with standards such as UL 1558, UL 9540, IEC 61439, and IEC 60529.
  • Experience with Open Compute Project rack formats, such as ORV3.
  • Professional Engineer (PE) license.
  • NFPA 70E training.
  • Experience with ERP, PLM, and engineering vault software.

Skills* Analytical rigor and attention to detail in design, calculation, and tolerance analysis.

  • Ability to move effectively between calculations, required standards, and laboratory measurements.
  • Clear written and verbal communication, including documentation of design decisions, assumptions, trade-offs, and test results.
  • Collaborative technical leadership across electrical, power electronics, test, compliance, sourcing, and manufacturing teams.
  • Ability to plan, prioritize, and deliver design work against a development schedule.

Working Conditions

You will work in offices, laboratories, and factories, and at supplier and customer sites, including test areas with energized equipment, wearing the personal protective equipment that NFPA 70E and site rules require. The role requires standing, walking, kneeling, and reaching during prototype builds and tests, and lifting parts and equipment of up to 50 pounds, using mechanical aids where required.

Travel within North America is up to 20%, including overnight stays at suppliers, test laboratories, and customer sites. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.

Prefer to apply directly?

Apply on Trystar

Company

Back to jobs